CaSi Cored Wire 50 28

Model :CaSi Cored Wire 50 28 , CaSi Cored Wire 55 28
Wire diameter: 13mm
Thickness of the steel: 0.035mm±0.005mm.
Powder contain: 225g/m ±10g/m.
Ratio powder/steel: 60/40.
Wire length: 5000m.
Coil weight: 1000-1400kgs.
Coil width: 600-800mm

Send Email Chat now

Description Parameter Application Our advantage FAQ

Description

Core wire technology is a new treatment in secondary steelmaking developed in recent years, alloy core wire can purify the molten steel, change the inclusion form, improve the cast ability of the importantly, it will increase the yield of alloy ,cut down the cost and consumption.

The treatment of melts with cored wire made this technology extremely economical and environmentally friendly to a high degree. The exact adjustmnet of the elements to be introduced into the smelting works inside the required deispersion range can be achieved efficiently with cored wires.

Parameter

CaSi Cored Wire
content	% Ca	% Si	% Al	%C	%S	%P
50 28	28% min	50-60 Min	2.4 Max	1.0 Max	0.04 Max	0.04 Max
(1) Wire diameter: 13mm.			(6) Coil weight: 1000-1400kgs.
(2) Thickness of the steel:			(7) Coil width: 600-800mm
0.035mm±0.005mm.
(3) Powder contain: 225g/m ±10g/m.			(8) Wire winding: horizontal
(4) Ratio powder/steel: 60/40.			(9) Packing: in steel cages covered with plastic
(5) Wire length: 5000m.
Remark: chemical composition and size can be optimized by the customers' requirements.

Application

1It is beneficial to adjust and control the content of easily oxidizable elements and trace elements, reduce smelting cost, shorten smelting time, and accurately control the content of ingredients.
2It can purify molten steel and partially change the nature and shape of inclusions, and improve the quality and casting state of molten steel.
3Use the cored wire to process the molten steel, the alloy elements react smoothly in the molten steel, which can avoid secondary oxidation. After the reaction, the floating rate of the inclusions is fast, and the purification treatment effect is uniform.
4The use of cored wire in steelmaking or cast iron production can avoid bringing gas into molten steel.